E-flite Tribute FX 3D ARF - Manual (Page 4)

E-flite Tribute Fx 3D ARF Assembly Manual
Important Information About Motor
Selection
We recommend the E-flite ® Park 450 Brushless Outrunner,
890Kv (EFLM1400) to provide you with excellent high-power
motor system, or the Park 400 Brushless Outrunner 920Kv
(EFLM1305) for sport power and a worry-free outrunner motor.
The Tribute Fx 3D does not include a propeller.
Lightweight Outrunner Setup
EFLM1305 Park 400 BL Outrunner, 920Kv
EFLA311B 20-Amp Brushless ESC
THP9103SJPL 910mAh 3-Cell 11.1V Li-Po
APC11038SF 11 x 3.8 Slow Flyer Prop
EFLAEC303 EC3 Device & Battery Connector,
Male/Female
EFLC3005 Celectra 1- to 3-Cell Li-Po Charger
This is a lightweight sport setup with adequate power for 3D flights.
High Power Outrunner Setup
EFLM1400 Park 450 BL Outrunner, 890Kv
EFLA311B 20-Amp Brushless ESC
THP13203SPL 1320mAh 3-Cell 11.1V Li-Po
APC12060E 12 x 6 Electric Prop
EFLAEC303 EC3 Device & Battery Connector,
Male/Female
EFLC3005 Celectra 1- to 3-Cell Li-Po Charger
This is a high-power performance setup for strong 3D flights.
Optional Accessories
EFLA110 Power Meter
Note on Lithium Polymer Batteries
Lithium Polymer batteries are significantly more
volatile than alkaline or Ni-Cd/Ni-MH batteries used
in RC applications. All manufacturer’s instructions
and warnings must be followed closely. Mishandling
of Li-Po batteries can result in fire. Always follow the
manufacturer’s instructions when disposing of Lithium
Polymer batteries.
Required Tools and Adhesives
Tools & Equipment
EFLA250 Park Flyer Tool Assortment, 5-piece
Or Purchase Separately
EFLA257 Screwdriver, #0 Phillips (or included
with EFLA250)
EFLA251 Hex Wrench: 3/32” (or included
with EFLA250)
6-minute epoxy
Cardstock
Drill
Drill bit: 1/16 in (1.5mm)
Felt-tipped pen
Foam-safe accelerator
Foam-safe CA
Hobby knife (#11 blade)
Hot glue
Low-tack tape
Paper towels
Ruler
Side cutters
String
T-pins
Threadlock