E-flite Tribute FX 3D ARF - Manual (Page 20)

0 E-flite Tribute Fx 3D ARF Assembly Manual
 7. Slide the cowling onto the fuselage.
 8. Slide the propeller adapter through the hole in
the propeller.
Important Information About Your Propeller
It is very important to check to be sure the propeller is
balanced before installing onto the shaft. An unbalanced
propeller may strip the gears or cause poor flight
characteristics.
Note: If it is necessary to enlarge the hole in the
propeller, make sure to check the balance of the
propeller afterwards.
 9. Slide the 1/2 in (13mm) washer onto the adapter.