E-flite Tribute FX 3D ARF - Manual (Page 22)

E-flite Tribute Fx 3D ARF Assembly Manual
Receiver and Battery Installation
Required Parts
Airframe Receiver
Motor battery Canopy
Required Tools and Adhesives
Hook and loop tape Hook and loop strap
 1. Mount your receiver inside the fuselage using hook
and loop tape. Route the receiver antenna following the
instructions provided with your radio system.
Note: Never cut the receiver antenna as this will greatly
reduce the range of your radio system.
 2. Secure the battery inside the fuselage using the hook
and loop tape, then use a hook and loop strap to secure.
 3. Position the canopy back in position on the fuselage.