beautypg.com

E-flite Tribute FX 3D ARF User Manual

Page 21

background image

1

E-flite Tribute Fx 3D ARF Assembly Manual

10. Slide the spinner backplate on the adapter. Thread

the propeller nut onto the adapter, but do not tighten it

at this time.

11. Slide the spinner assembly onto the motor shaft.

Align the cowling with the spinner backplate, leaving a

1/8 in (3mm) gap between the spinner and cowl. Use a

1/16 in (1.5mm) drill bit to drill four holes through the

cowling and into the hard points in the fuselage.

12. Secure the cowling to the fuselage using four

2mm x 6mm sheet metal screws.

13. Snap the spinner in place on the spinner backplate.

See also other documents in the category E-flite Air equipment: