Watts Autotrol 255 (400 Series) - Manual (Page 27)

27
4. Control will
not draw
brine.
a. Low water pressure.
b. Restricted drain line.
c. Injector plugged !
d. Injector defective !
e. Valve disc 2 and/or 3 not
closed.
f. Air check valve
prematurely closed.
a. Make correct setting according to
instructions.
b. Remove restriction.
c. Clean injector and screen.
d. Replace injector and cap.
(Contact dealer.)
e. Remove foreign matter from disc
and check disc for closing by
pushing in on stem. Replace if
needed. (Contact dealer.)
f. Put control momentarily into brine
refill. Replace or repair air check if
needed. (Contact dealer.)
1018075 Rev I.fm Page 27 Tuesday, February 17, 2004 4:26 PM