beautypg.com

460i control – Watts Autotrol 255 (400 Series) User Manual

Page 15

background image

15

460i Control

Figure 12

Programming

Plug the wall-mount transformer into a functioning electrical outlet that is not
controlled by a switch. Plug the transformer into the transformer plug receptacle
on the control.

Open the access door by pushing the raised tab on the door toward the left while
pulling the tab out (Figure 12).

Time of Day Setting

With the jumper on the set of pins next to the word TIME (Figure 13), set the time
of day to the closest hour by pressing the black TIME SET button. PM hours are
indicated by a light next to the letters PM on the display window.

Note:

The use of a small needle-nose pliers will aid in moving the jumper.

Note:

The unit is factory set to regenerate at 2:00 a.m. If you prefer to have the

unit regenerate at an earlier or later time, simply set the current time of day
accordingly (e.g., to have the unit regenerate at 4:00 a.m.—two hours later—set
the clock two hours earlier than the actual time of day).

Note:

The Timer Locking Pin should always be horizontal (Figure 12) during

operation.

PM Indicator

Water Flow Indicator

Hour Time Display

Access Door

Indicator Knob

Time Set Button

Transformer Plug
Receptacle

Jumper

Spare

Raised

Tab

Jumper

Locking Pin

Timer

1018075 Rev I.fm Page 15 Tuesday, February 17, 2004 4:26 PM