beautypg.com

Banner WORLD-BEAM QS30 Water Sensor User Manual

World-beam qs30h2o series, Features, Models

background image

High-Power Water Sensor

For the latest technical information about this product, including specifications, dimensions, and wiring, see

www.BannerEngineering.com

Features

• Special emitter/receiver infrared wavelength tuned to the absorption band of water
• Powerful enough to burn through many types of plastic and glass containers
• Water-based liquids will attenuate the signal; this enhances contrast on difficult

sensing applications found on bottle-filling lines

• Excellent noise immunity and crosstalk avoidance
• Easy-to-read operating status indicators
• Bipolar discrete outputs, PNP and NPN; analog model also available
• Light Operate and Dark Operate models available
• Models available with 2 m or 9 m (6.5' or 30') cable, or 150 mm (6") pigtail with

quick-disconnect fitting

• Rugged IP67 (NEMA 6) housing for harsh environments; 1200 psi washdown rat-

ed per NEMA PW12

• Compact housing, mounting versatility — 30 mm threaded barrel- or side-mount

Models

Standard Models**

Model*

Description

Sensing Beam

and Range†

Supply
Voltage

Output

QS30EXH2O

Emitter

1450 nm infrared

13 mm effective beam dia.

10 to 30V dc

--

QS30ARH2O

Receiver, light operate

2 m (6.5') range

Bipolar (NPN and

PNP)

QS30RRH2O

Receiver, dark operate

QS30ARXH2O

High-gain receiver, light operate

4 m (13') range

QS30RRXH2O

High-gain receiver, dark operate

QS30RXH2OU

High-gain receiver, analog

15 to 30V dc

0-10V Analog

Super High-Power Models**

Model*

Description

Sensing Beam

and Range†

Supply
Voltage

Output

QS30EXSH2O

Super high-power emitter

1450 nm infrared

13 mm effective beam dia.

10 to 30V dc

--

QS30ARXSH2O

Super high-power receiver, light operate

8 m (26') range

Bipolar (NPN and

PNP)

QS30RRXSH2O

Super high-power receiver, dark operate

* Only 2 m (6') cables are listed. For 9 m (30') cable, add suffix “W/30” to the model number (e.g., QS30EH2O W/30). For 150 mm (6.5")
pigtail with a 5-pin Euro-style connector, add suffix “Q5” to the model number (e.g., QS30EH2OQ5). A model with a QD
connector requires a mating cordset (see

Quick-Disconnect (QD) Cordsets

on page 7).

** Standard emitters will only work with standard receivers. Super High-Power emitters will only work with Super High-Power receivers.
† Sensors can be used at ranges greater than listed for applications that require less excess gain. Please consult the
factory for assistance on your long-range applications.

WORLD-BEAM QS30H2O Series

P/N 136166 rev. C

10/7/2011

0 136166

7

This manual is related to the following products: