Brother DCP-340CW - Manual (Page 33)

Installing the Driver & Software
31
M
ac
int
os
h
®
Wi
re
d
Network
Macintosh
®
Improper Setup
If you have setup wireless networking on your
machine before and you setup the wired
network, you should check that the machine’s
Network I/F
setting is set to
Wired LAN
. The
wireless network interface will be inactive with
this setting.
Press Menu.
Press a or b for
3.LAN
and press Set.
Press a or b for
6.Network I/F
and press
Set.
Press a or b for
Wired LAN
and press Set.
If the machine asks you
Reboot OK?
, press a
for
Yes
.
The machine will restart automatically.
12
From the Apple ® menu, click Chooser.
13
Click the Brother Ink (IP) icon, and then
choose BRN_xxxxxx (where xxxxxx are the
last six digits of the Ethernet address). Close
the Chooser.
For more information about connecting the
machine to a Macintosh
® network, see
Chapter 6 of the Network User’s Guide on the
CD-ROM.
The MFL-Pro Suite, Printer Driver and
Scanner Driver have been installed.
Note
ControlCenter2 is not supported in Mac OS ® 9.x.
14
To install Presto!
®
PageManager
®
, click the
Presto! PageManager icon and follow the
on-screen instructions.
Note
You can easily scan, share, and organize photos
and documents using Presto!
®
PageManager
®
.
Presto!
®
PageManager
®
has been
installed and the installation is now
complete.