Brother DCP-340CW - Manual (Page 15)

Installing the Driver & Software
13
Windo
ws
®
US
B
Windows
®
7
The installation of PaperPort
®
9.0SE will
automatically start and is followed by the
installation of MFL-Pro Suite.
8
When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
9
When this screen appears, go to the next step.
10
Lift the scanner cover to its open position.
11
Insert the USB cable to the USB socket marked
with a symbol. You will find the USB
socket above and to the left of the ink cartridge
slots, as shown below.
12
Carefully guide the USB cable into the trench
as shown below, following the trench around
and toward the back of the machine.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
13
Lift the scanner cover to release the lock.
Gently push the scanner cover support down
and close the scanner cover.
14
Turn on the machine by plugging in the power
cord.
It will take a few seconds for the installation
screens to appear.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all screens to
appear.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.