Metrohm Multi-Mode Electrode pro - Manual (Page 14)

2.2 Tools and auxiliary equipment
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 ￭￭￭￭￭￭￭￭
6.1246.120 Multi-Mode-Electrode pro
7 Screw cap (6.1247.110)
For the mercury refill opening. 8 Connector
For inert gas supply for controlling the nee-
dle valve.
9 Thread
For the screw cap (1-
7 ).
10 Contact pin
Electrical contact with mercury.
11 Mercury reservoir 12 Connector
For inert gas supply.
13 Quick connector
For the WE cable.
14 Adapter (6.2112.130)
For connecting the working electrode cable
with the quick connector (1-
13 ).
15 Glass capillary
6.1226.030 or 6.1226.050
2.2 Tools and auxiliary equipment
The MME pro is supplied with the following tools and auxiliary equipment:
￭ Electrode stand (6.2615.130)
￭ Wrench (6.1247.220)
￭ Mounting ring (6.1247.210)
￭ Adapter (6.2112.130)
Electrode stand
There are three ways to place the electrode in the electrode stand,
depending on the task to be done. The following figure shows the three
ways.