Metrohm 872 Extension Module Suppression - Manual (Page 17)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
872 Extension Module Suppression ￭￭￭￭￭￭￭￭ 9
3 Installation
3.1 Installation overview
The 872 Extension Module Suppression can be installed carrying out the
following easy steps:
1 Setting up the instrument
See Chapter 3.2, Page 10
2 Mounting base tray and bottle holder
See Chapter 3.3, Page 10
3 Installing the peristaltic pump
See Chapter 3.4, Page 15
￭ Install pump tubings.
￭ Connect aspirating capillaries for the regeneration solution and
the rinsing solution.
4 Installing the suppressor
See Chapter 3.5, Page 19
￭ Insert the rotor.
￭ Connect the suppressor.
5 Connecting the instrument
￭ Connect the socket labeled in on the 872 extension module and
the socket labeled Extension Module on the 850 Professional IC
with the cable 6.2156.070.