Metrohm 853 IC CO2 Suppressor - Manual (Page 27)

5.5 Warranty and Conformity
853 CO
2
Suppressor / Instructions for Use 8.853.8001EN
21
5.5.2 Declaration of Conformity
This is to certify the conformity to the standard specifica-
tions for electrical appliances and accessories, as well
as to the standard specifications for security and to sys-
tem validation issued by the manufacturing company.
CH-9101 Herisau, Switzerland
Tel. +41 71 353 85 85
Fax +41 71 353 89 01
www.metrohm.com
Name of commodity 853 CO
2
Suppressor
Name of manufacturer Metrohm Ltd., Herisau, Switzerland
Description The 853 CO
2
Suppressor is a device to remove CO
2
. It is connected between
suppressor module «MSM II» and detector.
This instrument has been built and has undergone final type testing according to the stan-
dards:
Electromagnetic compatibility: Emission
EN/IEC 61326, EN 55022 / CISPR 22
Electromagnetic compatibility: Immunity
EN/IEC 61326, EN/IEC 61000-4-2, EN/IEC 61000-4-3, EN/IEC 61000-4-4, EN/IEC 61000-4-5,
EN/IEC 61000-4-6, EN/IEC 61000-4-8, EN/IEC 61000-4-11, EN/IEC 61000-4-14, Namur
Safety specifications
EN/IEC/UL 61010-1, EN/IEC 61010-2-081, CSA-C22.2 No. 61010-1
It has also been certified by ElectroSuisse, which is member of the International Certification
Body (CB/IEC).
The instrument meets the requirements of the CE mark as contained in the EU
directives 89/336/EEC and 73/23/EEC and fulfils the following specifications:
EN 61326 Electrical equipment for measurement, control and laboratory use – EMC re-
quirements
EN 61010-1 Safety requirements for electrical equipment for measurement, control and
laboratory use
Metrohm Ltd. is holder of the SQS-certificate of the quality system ISO 9001 for quality as-
surance in design/development, production, installation and servicing.
The system software, stored in Read Only Memories (ROMs) has been validated in connec-
tion with standard operating procedures in respect to functionality and performance.
The technical specifications are documented in the instruction manual.
Herisau, April 1, 2005
D. Strohm Ch. Buchmann
Vice President Vice President
Head of R&D Head of Production
Responsible for Quality Assurance