Metrohm 857 Titrando - Manual (Page 20)

2 Installation
16 825 Lab Link, Instructions for Use
2.6 Setting up a connection
Under Connection new Lab Link connections can be set up; exist-
ing ones can be edited or deleted:
Connection
New: Sets up new connection
Edit: Edits selected connection
Delete: Deletes selected connection
Disconnect: Disconnects selected connection
Reconnect: Reconnects selected connection
Select New in order to set up a new Lab Link connection:
Settings
The specific settings for a Lab Link connection are made under
Settings.
Connection active
Connections which are not to be used for a longer period of time
can be exempted from the regular connection check (see Section
2.5.2) by deactivating this checkbox. This reduces unnecessary
network traffic.
For (re-)activation it is only necessary to activate this checkbox.
During the next periodic status test all the active connections will