Brother DCP-7020 - Manual (Page 35)

Making copies
3 - 8
3
Adjusting contrast
You can change the contrast to help an image
look sharper and more vivid.
1
Press Menu and or to select
2.Copy .
Press Set.
2
Press or to select 2.Contrast.
Press Set.
3
Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press Set.
4
Press Stop/Exit.
Out of Memory
message
If the memory becomes full while you are
making copies, the LCD message will guide
you through the next step.
If the Out of Memory message appears
when you are scanning the first page of your
document, press Stop/Exit and wait until the
other operarions in process finish and then try
again.
If you were scanning subsequent pages,
press Stop/Exit to cancel or Start to copy the
scanned pages.
Copy
2.Contrast