Using propeller holder, Assembling motor vibration absorbers – DJI S1000 User Manual
Page 26
©2014 DJI. All Rights Reserved.
26
Using Propeller Holder
Instructions
1.
Insert blades to propeller holder.
2.
Attach propeller holder to frame arm.
Assembling Motor Vibration Absorbers
A soft gasket is part of the vibration absorber. Assembly of the soft gasket must be carried out as per the diagram
below. Assembly is the same for CCW and CW propellers.
Notes
Ensure all soft dampers and vibration absorbers are in good condition before every flight. If not, replace
immediately. Otherwise, the flight performance of your aircraft will be adversely affected.