Cyclopital3D FinePix Real 3D W1 camera - Manual (Page 110)

96
Troubleshooting
Connections
Problem Problem Possible cause Possible cause Solution Solution Page Page
TV
No picture or
sound.
The camera is not properly connected. Connect the camera correctly. 44
An A/V cable was connected during movie
playback. Connect the camera once movie playback
has ended.
43, 44
Input on the television is set to “TV”. Set input to “VIDEO”. —
The camera is not set to the correct video
standard. Match the camera Q VIDEO SYSTEM set-
ting to the TV.
81
The volume on the television is too low. Adjust the volume. —
No color.
The camera is not set to the correct video
standard. Match the camera Q VIDEO SYSTEM set-
ting to the TV.
81
Computer
The computer
does not recognize
the camera.
The camera is not properly connected. Connect the camera correctly. 52–53
PictBridge
Pictures can not be
printed. The camera is not properly connected. Connect the camera correctly. 45
The printer is off . Turn the printer on. —
Only one copy is
printed.
The printer is not PictBridge-compatible. — —
The date is not
printed.
AC power
adapter Demo slides are
displayed.
ON is selected for s DEMO MODE.
Press the shutter button to exit demo and
select OFF for
s DEMO MODE.
6, 81