Cyclopital3D Sony PMW-TD300 Filter/Close-up Adapter - Manual

Filter/Close-up Adapter
for the
Sony PMW-TD300
C
yclopital 3D
NEW!
What’s in the package:
1 Back lens cover
1 Filter/Close-up Adapter
1 86-95mm step ring
1 Vivitar Close-up lens set
1 Front lens cap
1 Rear lens cover
Cyclopital3D Filter/Close-up Adapter for
Sony PMW-TD300
Every serious filmmaker and photographer understands the
benefits of using polarizers and creative filters. The Cyclopital3D
Filter/Close-up Adapter (FCA) for the Sony TD300 camera
enables the use of polarizers, filters and auxiliary close-up
lenses.
This FCA set enables you to use 86mm or 95mm creative filters
and close-up lenses or two 37mm filters. If professional grade
rectangular filters are needed, the unit is compatible with the
Century Optics Sunshade with 4x4 pro filter holder.
Most of the optional attachments function the same way in a 3D
environment as they do in 2D, with the exception of close-up
lenses,
which are fundamentally different. In 3D
cinematography, the close-up lens increases the range of
parallax by allowing the camera to achieve convergence on a
subject closer than what is possible without the additional close-
up lens. It also increases the common image seen by both
lenses, thus reducing the amount of image loss that can limit 3D
close-up photography and film-making.
For more information on close-up photography, see the white
paper on the “Support and Downloads” page of the Cyclopital3D
website, 3D Camera Parallax Adjustments, the Stereo Window,
and using Attachments for Close-up Photography, which can be
found
at: http://www.cyclopital3d.com/SUPPORT-AND-
DOWNLOADS.html.