ClearCube I/Port Quick Reference Guide User Manual
Page 32
28 • I/Port Installation
ClearCube I/Port User’s Guide, Rev. C
•
Do not hot-plug PS/2 devices on an I8330 I/Port. On the I8330, PS/2 devices
(keyboard or mouse) are not hot-pluggable. You must turn off the I8330 before
attaching or detaching PS/2 devices.
•
Disconnect USB devices using the “Safely Remove Hardware” icon in the
system tray. If USB devices are incorrectly disconnected, the USB chain is forced
to re-enumerate completely. This can cause a delay for the user, and will disrupt
any on-going USB communications (such as printer spooling or file transfer).
•
USB devices are not available on the I8330 I/Port until a blade connection is
established. Some USB keyboards and mice will function properly when
connected using a USB-to-PS/2 adapter.
•
The I8330 implements USB 1.1. Read and write performance are specified at
300KB/s read and 200KB/s write.
•
The I8330 does not support remote power on/off or reset functionality.
•
The I8330 is not capable of running a VPN client locally (on the I8330 device).
A VPN connection is possible only if another device (e.g., a router) to which the
I8330 is connected includes a VPN client and can, therefore, make the VPN
connection.