Cable requirements, Unpacking the i/port, Installing the i/port on the desktop – ClearCube I/Port Quick Reference Guide User Manual
Page 16: Figure 2, Clearcube i/port architecture cabling diagram
12 • I/Port Installation
ClearCube I/Port User’s Guide, Rev. C
Cable Requirements
For I/Port installations, you need eight CAT5 cables per chassis to connect the blades
to your network switch. You will not need to connect any cables to the C/Port
connections. With I/Ports, the cables going to the desktop are connected directly to
your network switch. Figure 2 provides schematics of the cabling required to connect
your chassis to I/Ports and your Ethernet network.
Unpacking the I/Port
When unpacking the I/Port, you will find one of each of the following items:
•
I/Port unit
•
I/Port power supply and power cord (optional for some regions)
•
Optional mouse and keyboard (may be shipped separately)
Installing the I/Port on the Desktop
To install an I/Port, do the following:
1. Place the I/Port on a desktop or other solid structure.
Figure 2 ClearCube I/Port Architecture Cabling Diagram
Chassis
Data Center
User Desktops
with I/Ports
Network
Switch
Admin C/Port
and Terminal
Ethernet
Cables