ClearCube I/Port Quick Reference Guide - Manual (Page 29)

ClearCube I/Port User’s Guide, Rev. C I/Port Installation • 25
Updating I/Port Software
The XPe Eon e100 and I8820, and the NeoLinux Eon e100 and I8020 I/Ports all use
ezRemote Manager for software updates. Software updates are sent, or pushed, to
the I/Ports in a package called a snap-in. Custom system images can also be pushed
out to I/Ports.
These brief procedures describe how to update or re-image XPe- and NeoLinux-
based I/Ports. The ezRemote Manager User Manual provides complete details on
pushing software updates or re-imaging the I/Port. The ezRemote Manager User
Manual can be downloaded at
http://www.neoware.com/support/documentation/archive.html .
To push a snap-in:
1. In ezRemote Manager, select Neoware Appliances in the left pane.
2. From the Actions menu, select Assets.
3. In the window that is displayed, click the Password button and enter the
password for the I/Ports to be updated.
4. Highlight the I/Ports to receive the snap-in.
5. Select the Snapin Manager icon (the icon with the red check mark).
6. Browse for the snap-in and click OK.
To re-image:
1. In ezRemote Manager, select Neoware Appliances in the left pane.
2. From the Actions menu, select Assets.
3. In the window that is displayed, click the Password button and enter the
password for the I/Ports to be updated.
4. Highlight the I/Ports to receive the image.
5. Select the Software Update Manager icon (the icon with the floppy disk).
6. Browse for the image file and click OK.
NOTE: ezRemote Manager is not supported on ClearCube model I8800 or I8010
I/Ports.