Figure 6, Remote desktop (rdp) configuration window, Figure 7 – ClearCube I/Port Quick Reference Guide User Manual
Page 22: Rdp display tab
18 • I/Port Installation
ClearCube I/Port User’s Guide, Rev. C
The following items can be configured prior to initiating an RDP connection:
•
Display: Desktop Size – Though RDP allows the desktop to be sized so that the
RDP connection runs in a window smaller than the local XPe desktop, anything
less than full-screen mode is not recommended for I/Port users.
•
Display: Color Depth – The color depth options range from 256 to True Color.
Generally, using only 256 colors negatively impacts the user experience, because
most images are grainy and low quality. 16-bit color is normally used.
•
Local Resources: Sound – Sound is configurable in three ways. Sound can
either be left at the remote computer so it plays at the source (the blade). This
probably would not be done, since the blades are in the data center. The other two
Figure 6 Remote Desktop (RDP) Configuration Window
Figure 7 RDP Display Tab