Brother DCP-7045N - Manual (Page 49)

Safety and legal
41
A
11 The power cord, including extensions should be no longer than 5 metres.
DO NOT share the same power circuit with other high powered appliances, such as an air
conditioner, copier, shredder or similar devices. If you cannot avoid using the printer with these
appliances, we recommend that you use a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.
12 DO NOT place anything in front of the machine that will block printed pages. DO NOT place
anything in the path of printed pages.
13 Wait until pages have exited the machine before picking them up.
14 Unplug this product from the power socket and refer all servicing to Brother Authorized Service
Personnel under the following conditions:
„ When the power cord is damaged or frayed.
„ If liquid has been spilled into the product.
„ If the product has been exposed to rain or water.
„ If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions. Incorrect
adjustment of other controls may result in damage and will often require extensive work by
a qualified technician to restore the product to normal operation.
„ If the product has been dropped or the casing has been damaged.
„ If the product exhibits a distinct change in performance, indicating a need for service.
15 To protect your product against power surges, we recommend the use of a power protection
device (Surge Protector).
16 To reduce the risk of fire, electric shock and injury to people, note the following:
„ DO NOT use this product near appliances that use water, a swimming pool or in a wet
basement.
„ DO NOT use the machine during an electrical storm (there is the remote possibility of an
electrical shock).