Brother DCP-7045N User Manual

Page 17

Loading paper and documents

Using both hands, slide the manual feed
slot paper guides to the width of the
paper that you are going to use.

Using both hands, put one sheet of
paper or one envelope in the manual
feed slot until the front edge of the paper
or envelope touches the paper feed
roller. When you feel the machine pull in
the paper, let go.

Note

• Put the paper into the manual feed slot

with the side to be printed face up.

• Make sure that the print media (See

Acceptable paper and other print media
on page 11) is straight and in the proper
position on the manual feed slot. If it is not,
the paper or the transparency may not be
fed correctly, resulting in a skewed
printout or a paper jam.

• Do not put more than one sheet of paper

in the manual feed slot at any one time, as
it may cause a jam.

• If you put any print media in the manual

feed slot before the machine is in the
Ready state, the print media may be
ejected without being printed on.

• To easily remove a small printout from the

output tray, lift up the scanner cover by
using both hands as shown in the
illustration.

• You can still use the machine while the

scanner cover is up. To close the scanner
cover, push it down with both hands.