Brother DCP-7045N - Manual (Page 31)

Making copies
23
4
Copy options
(temporary settings)
4
When you want to quickly change the copy
settings temporarily for the next copy, use the
temporary Copy keys. You can use different
combinations.
The machine returns to its default settings
one minute after copying.
Enlarging or reducing the
image copied
4
You can choose the following enlargement or
reduction ratios:
* The factory setting is shown in Bold with an
asterisk.
(DCP-7045N only) When set to Auto, the
machine calculates the reduction ratio that
best fits the paper size the paper tray set to.
(See Paper size on page 17.) Auto is only
available when using the ADF.
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
To enlarge or reduce the next copy follow the
instructions below:
a
Load your document.
b
Enter the number of copies you want.
c
Press Enlarge/Reduce.
d
Do one of the following:
„ Press a or b to choose the
enlargement or reduction ratio you
want.
Press OK.
„ Press a or b to choose
Custom(25-400%).
Press OK.
Press a or b to enter an enlargement
or reduction ratio from 25% to 400%.
Press OK.
e
Press Start.
Note
Page Layout Options 2 in 1(P), 2 in 1(L), 4
in 1(P) or 4 in 1(L) are not available with
Enlarge/Reduce.
Press 100%*
97% LTRiA4
94% A4iLTR
91% Full Page
85% LTRiEXE
83%
78%
70% A4iA5
50%
Custom(25-400%)
Auto
200%
141% A5iA4
104% EXEiLTR