Brother DCP-7045N - Manual (Page 27)

General setup
19
3
LCD contrast
3
You can change the contrast to make the
LCD look lighter or darker.
a
Press Menu.
b
Press a or b to choose 1.General
Setup.
Press OK.
c
Press a or b to choose 5.LCD
Contrast.
Press OK.
d
Press a to make the LCD darker. Or,
press b to make the LCD lighter.
Press OK.
e
Press Stop/Exit.
User Settings List
3
You can print a list of the settings you
programmed.
a
Press Menu.
b
Press a or b to choose 1.General
Setup.
Press OK.
c
Press a or b to choose 6.User
Settings.
Press OK.
d
Press Start.
e
Press Stop/Exit.
Network Configuration
List (DCP-7045N only)
3
The Network Configuration List prints a report
listing all the current network configuration
including the network print server settings.
Note
Node name: Node name appears in the
Network Configuration List. The default
node name is “BRNXXXXXXXXXXXX”.
a
Press Menu.
b
Press a or b to choose 1.General
Setup.
Press OK.
c
Press a or b to choose 7.Network
Config.
Press OK.
d
Press Start.
e
Press Stop/Exit.