Bully Dog 3330x Custom Gauge Pods - Manual (Page 26)

25
33302/33303: GM Sierra/Silverado 1999-2007
1. Remove the driver’s side dash
panel.
2. Pull out the weather stripping
around the A-pillar (so it can be
moved easily).
3. Attach the GT, WatchDog or
PMT cradle to the pod. (See
diagram on pages 3 and
4.)
4. Peel the clear strip(s) off the
adhesive tape on the back of
the pod mount.
5. Slide the pod over the stock
A-pillar until they line up.
a. Be careful not to touch the
pod to the pillar (adhesive
tape).
b. If you are installing a pod
Remove dash panel
Bill of Materials
(4) Plastic Rivets
POD
Most custom gauge pods come in black.
Consider before beginning installa-
tion that the custom gauge pod can
be painted to match the color of the
vehicle interior. The custom gauge pod
is made from ABS plastic and can be
painted with spray paint found at auto
parts stores.
Pull out weather stripping
Line up and slide gaugepod
over stock A-pillar;
then push into place.