Bully Dog 3330x Custom Gauge Pods - Manual (Page 10)

9
31304: Ford SD 2011+
Installation
Existing Trim Removal
1. Place flat head screwdriver in the middle of each side of
the cap and open cap, taking care not to damage stock
A-pillar.
2. Using a 7mm socket with extension and ratchet; unscrew
the two bolts securing the stock A-pillar where the caps
were opened up. Loosen them all the way and remove
stock A-pillar.
Most custom gauge pods come in black.
Consider before beginning installation
that the custom gauge pod can be
painted to match the color of the
vehicle interior. The custom gauge
pod is made from ABS plastic and can
be painted with spray paint found at
auto parts stores.
Screwdriver
Placement