beautypg.com

Meter rack, Figure 9 meter rack assembly – Bird Technologies 8650B Series User Manual

Page 24

background image

Bird 8650 Series Moduload RF Load Resistor

12

Meter Rack

The Meter Rack is used to hold the meter at the correct angle, for the best pos-

sible viewing.
1. Assemble the rack using four #6-32 x 3/8 screws.
2. Remove the two screws from the panel at a desired mounting location.
3. Mount the assembled Meter Rack using #8-32 x 3/8 phillips truss head screws.
Figure 9 Meter Rack Assembly

See also other documents in the category Bird Technologies Accessories communication: