Bird Technologies 8650B Series - Manual (Page 10)

viii
About This Manual
This manual covers the operating and maintenance instructions for the following
models:
Changes to this Manual
We have made every effort to ensure this manual is accurate. If you discover any
errors, or if you have suggestions for improving this manual, please send your
comments to our Solon, Ohio factory. This manual may be periodically updated.
When inquiring about updates to this manual refer to the part number and revi-
sion on the title page.
Terminology
There are some unique terms used throughout this literature. They are defined
here to clarify any misunderstanding.
Moduload -
The entire unit.
Load - The component which connects to the RF line. It is connected to the HEAT
EXCHANGER with two hoses. It contains the RESISTOR.
Heat Exchanger -
The component containing the pump, blower, coolant reservoir,
control panel, and electrical access box. It is connected to the LOAD with two hoses.
Resistor -
A subcomponent of the LOAD. This is the ceramic resistor which actu-
ally absorbs the RF power.
Literature Contents
Introduction — Describes the features of the Moduload, lists equipment supplied
and optional equipment, and provides power-up instructions.
Theory of Operation
— Describes how the Moduload works.
Installation — Describes the power supply and load connection instructions.
Operating Instructions — Describes the base level operation instructions.
Maintenance — Lists routine maintenance tasks as well as troubleshooting for
common problems. Specifications and parts information are also included.
8655B115-6 8655B230-5 8655B230-6
8656B115-6 8656B230-5 8656B230-6