Bird Technologies 8329-300 - Manual (Page 33)

Customer Service
Sales /
Repair
Facilities
U.S.A. Sales and Manufacturing
Service Group
Bird Electronic Corporation
30303 Aurora Road
Cleveland (Solon), Ohio 44139-2794
Phone: (440) 248-1200
Fax: (440) 248-5426
Sales
Facilities
For the location of the sales office nearest you, give us a call
or visit our Web site at:
http://www.bird-electronic.com
Shipment
RF Section
Assembly
Wrap the RF section assembly with sufficient padding to
avoid damage in shipping and tape securely. Place the
wrapped RF section in a cardboard carton and pad or brace
it to prevent shifting.
Complete
Unit
Should you need to return the attenuator, first remove the
vent plug and replace it with the shipping plug. The unit
may be shipped with its dielectric coolant; however, do not
ship the unit with its dielectric coolant if the unit has devel-
oped a leak. Drain the coolant first. Place the attenuator in
a wooden crate or other substantial shipping container, and
pack or brace it securely to prevent damage in shipping.
All instruments returned for service must be shipped pre-
paid and to the attention of the Customer Service Group.
23
Maintenance