Bird Technologies 8329-300 - Manual (Page 3)

Safety Precautions
The following are general safety precautions that are not necessarily related
to any specific part or procedure, and do not necessarily appear elsewhere in
this publication. These precautions must be thoroughly understood and ap-
plied to all phases of operation and maintenance.
Keep Away From Live Circuits
Operating Personnel must at all times observe general safety precautions. Do
not replace components or make adjustments to the inside of the test equip-
ment with the high voltage supply turned on. To avoid casualties, always re-
move power.
Shock Hazard
Do not attempt to remove the RF transmission line while RF power is pres-
ent.
Do Not Service Or Adjust Alone
Under no circumstances should any person reach into an enclosure for the
purpose of service or adjustment of equipment except in the presence of some-
one who is capable of rendering aid.
Safety Earth Ground
An uninterruptible earth safety ground must be supplied from the main
power source to test instruments. Grounding one conductor of a two conduc-
tor power cable is not sufficient protection. Serious injury or death can occur
if this grounding is not properly supplied.
Resuscitation
Personnel working with or near high voltages should be familiar with modern
methods of resuscitation.
Safety Symbols
WARNING
Warning notes call attention to a procedure, which if not correctly
performed, could result in personal injury.
i