Bird Technologies 8327-300 - Manual (Page 25)

Sales Facilities For the location of the sales office nearest you, give us a call or visit our Web site
at:
http://www.bird-electronic.com
Shipment
RF Section
Assembly
Wrap the RF section assembly with sufficient padding to avoid damage in shipping
and tape securely. Place the wrapped RF section in a cardboard carton and pad or
brace it to prevent shifting.
Complete Unit Should you need to return the Attenuator, first remove the vent plug and replace it
with the shipping plug. The unit may be shipped with its dielectric coolant; however,
do not ship the unit with its dielectric coolant if the unit has developed a leak. Drain
the coolant first. Place the attenuator in a wooden crate or other substantial shipping
container, and pack or brace it securely to prevent damage in shipping.
All instruments returned for service must be shipped prepaid and to the attention
of the Customer Service Group.
Storage
No special preparations for storage are necessary other than to cover the equipment
to keep out dust and dirt. Store the unit in a dry and dust-free environment where
the ambient temperature will remain within the -40°C to -45°C (-40°F to +113°F)
operational range of the load.
Maintenance
15