Bang & Olufsen BeoSystem 1 - User Guide - Manual (Page 49)

49
Maintenance of BeoSystem 1
Regular maintenance, such as
cleaning BeoSystem 1, is the
responsibility of the user. To achieve
the best result, follow the
instructions to the right. Contact your
Bang & Olufsen retailer to determine
recommendations for regular
maintenance.
Any defective parts are covered by
the guarantee during the warranty
period.
Cleaning surfaces…
Wipe dust off the surfaces using a dry, soft
cloth. Remove grease stains or persistent dirt
with a soft, lint-free, firmly wrung cloth,
dipped in a solution of water containing only
a few drops of mild detergent, such as
washing-up liquid.
Cleaning the Beo4
Wipe the Beo4 remote control with a soft,
lint-free, firmly wrung cloth.
Changing the batteries…
When ‘BATTERY’ appears in the Beo4 display,
it is time to change the batteries in the
remote control.
The Beo4 requires three batteries. We
recommend that you use Alkaline batteries
only (1.5 volt – size AAA). Replace the
batteries as shown on this page. Keep a
finger on top of the batteries until the lid is
replaced.
When you have replaced the batteries, you
must wait for about 10 seconds until ‘TV’
appears in the display. The Beo4 remote
control is then ready for use again.
1
2
3
1
2
Never use alcohol or other solvents to clean
any part of BeoSystem 1!