Bang & Olufsen BeoSystem 1 - User Guide - Manual (Page 36)

36
See the name of the active sound system
The surround sound module in your
television allows you to see which
active sound system is currently
playing on the source or programme
you are watching.
The sound system is an integrated
part of a programme or, for example,
a DVD disc. Therefore, as the sound
system is distributed to you from the
broadcaster, you can not preset a
sound system in this menu.
A given sound system signal may
automatically switch on the speaker
combination considered optimal for
the specific sound system. You can
always choose to disregard such
automatic change in speaker
combination. For further information,
refer to the chapter ‘Home Theatre’
on page 10.
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 2 to bring up the Sound menu.
> Press 5 to bring up the Sound system menu. The
current sound system is shown. Mono/Stereo
appears if Dolby sound is not active.
> Press EXIT to exit all menus.
Sound
1 Adjustment
2 Speaker type
3 Speaker distance
4 Speaker level
5 Sound system
Sound systems that can appear in the menu are:
Dolby Digital, Dolby Surround Pro Logic, Dolby
3 Stereo, Dolby Digital + Dolby Surround Pro
Logic, Mono/Stereo and DTS Digital Surround.