Make the picture fill out the screen, Switch between two screens – Bang & Olufsen BeoSystem 1 - User Guide User Manual
Page 11
11
Make the picture fill out the screen
BeoSystem 1 always ensures you the best
possible picture. It automatically adapts the
picture so that it fills out as much of the
screen as possible. However, you can still
choose the format you prefer. When you
select a format yourself, the automatic
format selection is deactivated.
Press repeatedly to display
FORMAT on Beo4
Press if you want to optimise the
picture, or…
…press the number of the
desired picture format
If you have chosen Format 1…
Press
l or n to select variations
of this format
If you have chosen Format 2…
Press
m or p to move the
picture up and down
Press to leave the FORMAT
function
Picture formats to choose from
FORMAT 0… For setups with two screens. Moves
the picture from, for example, a plasma screen
onto a larger projector screen, or vice versa.
BeoSystem 1 switches the picture and the display
information concerning the current source to the
selected screen.
FORMAT 1… For standard TV pictures. Two
variations are available: 15:9 and Panoramic
view (for the largest picture).
FORMAT 2… For letter-box pictures. When you
select FORMAT 2, the picture is automatically
adjusted vertically. This ensures that channel
names or subtitles – if these appear in the
broadcasted picture – can be seen.
FORMAT 3… For genuine 16:9 wide-screen
pictures. FORMAT 3 is usually selected
automatically. If this is not the case, you can
select it yourself.
Switch between two screens
If you have connected two screens to
BeoSystem 1 at the same time, such as a
plasma screen and a projector screen for
Home Theatre use, you can switch between
these at any time by selecting FORMAT 0 on
Beo4.
LIST
FORMAT
GO
0 – 3
l n
m
p
EXIT
If you have a home automation system connected,
the screen, lights and curtains can be equally
adjusted when you choose FORMAT 0 and switch
to the Home Theatre setup. For information about
how to connect BeoSystem 1 to a home automation
system, refer to the chapter ‘Connect a screen to
BeoSystem 1’ on page 42.