Bang & Olufsen BeoSystem 1 - User Guide - Manual (Page 48)

48
Close-up socket panel
You can connect headphones and
listen to a TV programme, or you can
connect a Camcorder and watch your
home movies on BeoSystem 1. If you
have connected for example a
BeoCord V 8000 video tape recorder,
you can copy Camcorder recordings
onto a videotape.
The close-up socket panel
S-VHS
For the connection of S-VHS or Hi-8 Camcorders
only.
VIDEO – R – L
These sockets are for connection of a video
camera:
L – R: For audio connection (right and left sound
channel respectively).
VIDEO: For the Video signal.
PHONES
You can connect stereo headphones to the
socket marked PHONES. The speakers
connected to BeoSystem 1 can then be cut out
by pressing the middle of the Beo4 volume
button.
Watch Camcorder on BeoSystem 1
To watch your Camcorder recordings, connect
the Camcorder and switch BeoSystem 1 on.
When you start playback on your Camcorder,
BeoSystem 1 automatically registers the signal
and you can see the pictures from the
Camcorder on the screen.
If the signal from the Camcorder is switched
off…
> Press LIST repeatedly to display CAMCORD on
Beo4 and press GO.
In order to display CAMCORD on Beo4, you must
first add it to the Beo4 list of functions. For
further information, refer to the chapter
‘Customise Beo4’ on page 18 in the Reference
book.
Copy from a Camcorder
If you have connected a video tape recorder,
such as a BeoCord V 8000, to BeoSystem 1,
and you connect your Camcorder to the
Camcorder and headphones sockets, you can
copy Camcorder recordings onto a videotape.
While the tape is being copied, you can watch
a TV programme or switch BeoSystem 1 to
standby.
To copy a recording from a Camcorder…
> Connect your Camcorder and start playback on
the Camcorder.
> Press RECORD to prepare BeoCord V 8000 for
recording.
> Press RECORD again to start recording.
> Press V TAPE and then STOP to pause a
recording.
> Press RECORD to resume a paused recording,
or…
> …press STOP again to stop a recording entirely.
PHONES L R VIDEO S-VHS