Bang & Olufsen BeoSystem 1 - User Guide - Manual (Page 26)

26
Tune in TV channels
You can make BeoSystem 1 find your
TV channels for you.
Preset up to 99 different TV channels
on channel numbers of their own
and give each channel a distinct
name.
You can tune in new channels or re-
tune previously deleted channels.
When tuning in channels via the Add
program menu, your previously tuned
channels are left unchanged. This
allows you to keep channel names,
their order in the TV list, and any
special settings you may have stored
for those channels, such as decoder
or broadcast system settings.
Find available channels
When you set up BeoSystem 1 for the first
time, you can tune in the TV channels that
are available in your area via the TV tuning
menu. BeoSystem 1 finds available channels
and stores them by number and name.
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press GO to bring up the Tuning menu.
> Press GO again to bring up the TV tuning menu.
> Press 3 to bring up the Auto tuning menu. The
Freq (frequency) and Pr (program) fields are
shown.
> Press m to start automatic tuning. The content
of the frequency and program fields show your
progress.
When tuning is completed, you can rearrange,
delete or rename channels from a TV list. This list
also appears if you press STOP during auto tuning.
For information about editing the TV list, refer to
the chapter ‘Edit tuned TV channels’ on page 28.
TV tuning
1 Edit TV list
2 Add program
3 Auto tuning
4 Manual tuning
Freq Pr
210 12