Bang & Olufsen BeoSystem 1 - User Guide - Manual (Page 34)

34
To change brilliance, colour or contrast…
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 3 to bring up the Picture menu.
> Press l or n to move between the items on the
menu.
> Press m or p to adjust the settings for each
item.
> Press EXIT to store your settings until you
switch off BeoSystem 1, or…
> …press GO to store your settings permanently.
For video sources using the NTSC signal a fourth
option – TINT (colour shade or nuance) – will be
available for adjustment.
Change brilliance, colour or contrast
Adjust the picture settings via the Picture
menu. Temporary settings are cancelled
when you switch off BeoSystem 1.
Picture and sound settings are preset
from the factory to neutral values
which suit most viewing and listening
situations. However, if you wish, you
can adjust these settings to your
liking.
Adjust picture brilliance, colour or
contrast. Sound settings include
volume, bass, treble and loudness.
You can also adjust subwoofer level,
if BeoLab 2 is part of your setup.
Store your picture and sound settings
temporarily – until BeoSystem 1 is
switched off – or store them
permanently.
For information about how to change
the picture format, refer to the
chapter ‘Home Theatre’ on page 10.
Adjust picture and sound settings
Setup
1 Tuning
2 Sound
3 Picture
4 Connections
5 Menu
6 Clock
Brilliance Colour Contrast
32 32 20