Ambient Lanc Logger - ALL601 - Manual (Page 13)

13
MENU DESCRIPTION
ON OFF Menu
SWITCH ON
Press ESCape for 3 seconds, display will light up and show
AMBIENT CLOCKIT
LANC LOGGER ALL601
Serial Nr...........,
Software version........
After 5 seconds display changes to last selected job and settings with job
open
SWITCH OFF
Press ESC for 3 seconds. Standby window will show
Press ESC to switch off in 3 seconds
Press ENT to enter Standby
Press left cursor to return
Note: In standby all settings are held and the timecode generator continues to
generate accurate timecode. The ALL is in a state of sleep except for the TC
generator and reference oscillator. 2 pixels ( yellow Blue) in top right corner of
the display blink regularly.