Ambient Lanc Logger - ALL601 - Manual (Page 10)

10
Instructions for use
General desription
KEYS
There are 6 keys used to configure the ALL and to call up system data,
ESCape
( also Log and turn on/off )
ENTer ( also Log and standby )
Left cursor
( and ascii ! )
Down cursor ( and ascii # )
Up cursor ( and ascii * )
Right cursor ( and ascii ? )
Some keys have additional special functions. A few functions such as
jamming the internal TOD generator from Ext TC or incrementing the
cassette number can be carried out using a quickkey combination.
DISPLAY
The display of the ALL is divided up into 3 sectors.
Source TC bar, top, in yellow
The TOD TC generator Time, Userbits and Framerate is generally
displayed here.
In Convert mode, the Time and other data from the selected source, eg
MIDI, LANC, is displayed.
In principal this block displays the “ Source” Timecode details.