Rockwell Automation Liqui-Flo Trane Addendum - Manual (Page 11)

About the Drive and Cabinet 2-1
C
HAPTER
2
About the Drive and Cabinet
This chapter describes how to identify the Trane cabinet and the Liqui-Flo drive using
the Trane model number matrix. Liqui-Flo drive power ratings are listed as well as
available Trane options. Cabinet component drawings are also provided. Note that in
this manual references to the “cabinet” refer to both the 6-pulse and 12-pulse rectifier
cabinets, unless otherwise indicated.
2.1 Identifying the Trane Model Number
Each Trane cabinet can be identified by its model number. See figure 2.1. A typical
cabinet model number is shown in table 2.1 as are the Liqui-Flo drive power ratings.
Figure 2.1 – Identifying the Trane Model Number
NNNN
Mounting Location
First Design
Rectifier
Special Options
Agency Listing
A = Unit Mounted
B = Remote Mounted
1 = UL/CUL Listed
0 = 6-Pulse Rectifier
A = 12-Pulse Rectifier
0 = None
S = Special
2 = California Code (includes UL)
Voltage
Adaptive Frequency Drive
Liquid-Cooled
Running Load Amps
F = 460 V, 60 Hz, 3-Phase
G = 480 V, 60 Hz, 3-Phase
AFD B N A0 N N N N