Rockwell Automation T3470A ICS Regent Analogue Output Modules - Manual (Page 10)

Analog Output Modules (T3470A)
1 0
Industrial Control Services
1) Set the Module Type:
Position the cursor on the module slot you wish to define.
Choose Set Module Type from the Edit Menu and select
the appropriate analog output module from the list.
2) Edit the Module Definition:
Choose Edit Module Definition from the Edit Menu. A
dialog box will open where you can define the analog
output point definitions.
Figure 6. Analog Output Module Definition.
3) Edit each point:
Choose Edit from the Module Definition dialog box to
define a name and description for each output point. In
the Analog Output Point dialog, enter names and values
for the configuration fields as described below.