Rockwell Automation 1897-NOV High Speed Analog Installation Instructions - Manual

Publication CIG-5.1 – April 1998
Fast Isolated Analog
Output Module
(Catalog Number 1897-NOV)
Use this document as a guide when installing the 1897-NOV output
module.
To See page
Prevent Electrostatic Discharge Below
Understand Compliance to European Union Directives 2
Calculate Power Requirements 2
Determine Module Placement 3
Install the Module and Remote Termination Panel 3
Key the Backplane Connector 4
Connect the Wiring to the Module 4
Connect Wiring to the Remote Termination Panel 5
Connect Cables to the Remote Termination Panel 5
Grounding Your Field Devices 7
Configuring Your Output Module 7
Reading Data from Your Output Module 9
For this reference information See page
Troubleshooting with the Indicators 10
UL/CSA Hazardous Location Approval 11
Specifications 12
The analog output module is sensitive to electrostatic discharge.
!
ATTENTION: Electrostatic discharge can damage
integrated circuits or semiconductors if you touch
backplane connector pins. Follow these guidelines
when you handle the module:
•
Touch a grounded object to discharge static potential
•
Wear an approved wrist-strap grounding device
•
Do not touch the backplane connector or
connector pins
•
Do not touch circuit components inside the module
•
If available, use a static-safe work station
•
When not in use, keep the module in its
static-shield box
Installation Instructions
Contents
Prevent Electrostatic
Discharge