Rockwell Automation SA500 DC Bus Supply - Manual (Page 10)

1-2 SA500 DC Bus Supply
1.1 Related Publications
This instruction manual provides a description of the SA500 DC bus supply hardware.
Installation and troubleshooting guidelines are also provided. Note that this instruction
manual does not describe specific applications of the standard hardware or software.
For more information, refer to the instruction manuals contained in the SA500 drive
binder, S-3002, as listed in table 1.2. It is assumed that the user is familiar with the
manuals in S-3002 before installing, operating, or performing maintenance upon this
equipment. Refer to these instruction manuals as needed.
:
Additional information about using the SA500 Bus Supply is found in the instruction
manuals, prints, and other documents shipped with each drive system. Always consult
the prints shipped with the drive system for specific mounting and connecting
information about your drive.
1.2 Related Hardware
Bus connection wires are normally provided with engineered drive systems. These
wires connect the DC Bus Supplies to the SA500 AC Power Modules and are required
for proper operation. Substitute cables should not be used.
Table 1.2 – SA500 Documentation (Binder S-3002)
Document Document Part Number
DPS Overview S-3005
Universal Drive Controller Module S-3007
Fiber Optic Cabling S-3009
SA500 DC Bus Supply S-3017
SA500 AC Power Modules S-3018
SA500 Diagnostics, Troubleshooting, & Start-Up
Guidelines S-3022
SA500 Information Guide S-3024
SA500 Drive Configuration & Programming S-3044