Rockwell Automation 20D Lifting Mounting PowerFlex 700S and 700H Drives (Frame 10 - 14) User Manual
Lifting & mounting powerflex
![background image](/manuals/581335/1/background.png)
Installation Instructions
Lifting & Mounting PowerFlex
®
700S and 700H
Drives (Frames 10 - 14)
General Precautions
What You Need to Do
❐ Step 1: Attach the lifting hardware to the drive
❐ Step 2: Remove the skid and shipping feet
❐ Step 3: Mount the drive to the floor and/or wall
❐ Step 4: For AC input frame 14 drives only, connect the two enclosure
sections with the kit provided.
!
ATTENTION: To guard against possible personal injury and/or
equipment damage
…
•
Do Not allow any part of the drive or lifting mechanism to
make contact with electrically charged conductors or
components.
•
At no time should a person or their limbs be directly
underneath the items being lifted.
•
Do not subject the load to high rates of acceleration or
deceleration.
•
Inspect all lifting hardware for proper attachment before
lifting the drive unit.