Rockwell Automation 44887-PUB, 44887 Enwatch - Manual (Page 16)

Publication GMSI10-UM031C-EN-E - January 2009
12 Installing the Enwatch
4. Turn on the Enwatch unit. It should display its configuration, then a
configuration menu in the terminal window.
5. Select 5- Configure Adapter Settings.
6. Select 2 - Assign Host MAC, and set it to the MAC address from the
board by pressing ESC.
---------- Start monitor com port: COM1 9600 N81
Intelligent Transducer Adapter Type 1) V 1.2
Copyright Icon Research Ltd 1998/99
Main Menu:
1 - Exercise Hardware Control
2 - Exercise Memory Devices
3 - Exercise Ethernet Controller
4 - Exercise Combined Sub-Systems
5 - Configure Adapter Settings
6 - Enter Download Mode
Make your selection (1-6) : 5
Intelligent Transducer Adapter Type 1) V 1.2
Copyright Icon Research Ltd 1998/99
Configure Adapter Menu:
1 - Default Settings
2 - Assign Host MAC
3 - Assign Host IP
4 - Assign Host UDP Port
5 - Assign Subnet Mask
6 - Assign Gateway IP
7 - Assign Name
8 - Assign Network Option
9 - Assign Debug Level
ESC - Back to Main Menu
Intelligent Transducer Adapter Type 1) V 1.2
Copyright Icon Research Ltd 1998/99
Configure Adapter Menu:
1 - Default Settings
2 - Assign Host MAC
3 - Assign Host IP
4 - Assign Host UDP Port
5 - Assign Subnet Mask
6 - Assign Gateway IP
7 - Assign Name
8 - Assign Network Option
9 - Assign Debug Level
ESC - Back to Main Menu
Make your selection (1-9) : 2
Assigning Host MAC
Current Host MAC : 00-50-C2-02-00-01
Enter New Address or ESC to abandon :
Aborted Input - Host MAC unchanged