Rockwell Automation T3837 ICS Regent MODBUS Master Package for WINTERPRET - Manual (Page 16)

MODBUS Master Package for W INTERPRET (T3837)
P D - 6048 August, 96
(Issue 1) 16
number in the range of 2 - 6, and must not be the same as the Secondary
Port field.
Secondary Port
The compile time parameter which selects the Regent serial port to be used
as the secondary MODBUS port. If not left blank, this field must be a valid
port number in the range of 2 - 6, and must not be the same as the Primary
Port field.
Enable
The variable to be used as the ENABLE control relay. If not left blank, this
field must contain a valid W
INTERPRET tag name.
Error
The variable to be used as the ERROR output coil. If not left blank, this
field must contain a valid W
INTERPRET tag name.
Reset
The variable to be used as the ERROR output coil. If not left blank, this
field must contain a valid W
INTERPRET tag name.
Error Code
The variable to be used as the [ERROR] CODE output register. If not left
blank, this field must contain a valid W
INTERPRET tag name
Error Node
The variable to be used as the [ERROR] NODE output register. If not left
blank, this field must contain a valid W
INTERPRET tag name.
MODBUS Scan Time
The variable to be uses as the [MODBUS Scan] TIME output floating
point register. If not blank, this field must contain a valid W
INTERPRET tag
name.
MODBUS Scan Toggle
The variable to be uses as the [MODBUS Scan] TOGGLE output coil. If
not blank, this field must contain a valid W
INTERPRET tag name.
Search Menu
From the Search Menu (see Figure 6), you can select the Go To Variable,
Find, and Find Next commands.