Rockwell Automation MAO04NND Analogue Output Module - Manual (Page 14)

14 MAO04NND Octrober 2005 – Issue 1
Triguard SC300E
SUPPLEMENTARY INFORMATION
Connector J1 is the I/O bus.
Field output connectors J2 and J3 are in parallel.
The Channel connections are shown in Table 2-1.
Table 2-1. Current loop sensing connections to Connector J2
DIN41612 Connector J2
Channel Current-loop
positive
Current-loop
output
Current-loop
sensing
Current-loop
common
1 J2-10a J2-10c J2-18a J2-18c
2 J2-12a J2-12c J2-20a J2-20c
3 J2-14a J2-14c J2-22a J2-22c
4 J2-16a J2-16c J2-24a J2-24c
J2-1c : Cable screen from earth on chassis backplane
The J2 connectors that are reserved for future use are shown in Table 2-2.
Table 2-2. Connections reserved for future use
DIN41612 Connector J2 Channel
Under-range
logic input
Over-range
logic input
1 J2-2a J2-2c
2 J2-4a J2-4c
3 J2-6a J2-6c
4 J2-8a J2-8c
J2-1a : System 0V