Rockwell Automation T7419 ICS Regent+Plus Fire Detector Input Modules - Manual (Page 15)

Fire Detector Input Modules (T7419)
P D - 7 0 3 2 M a r - 0 6
15
3) Edit each point:
Choose Edit from the Module Definition dialog box to
define a name and description for each input point. In the
Fire Detector Input Point dialog, enter names and values
for the configuration fields as described below.
Figure 7. Defining a Fire Detector Input Point.
Name
Also called the tag name, this is the name used in the
application program to reference the fire detector input’s
Tripped/Healthy state. The name can be up to 12 characters
long.
Description
This 40-character field provides a place to describe the input
point definition. The description is used to help document
your system (it does not affect application program operation).
Fault Name
This is the name used in the application program to reference
the input point line fault status. The name can be up to 12
characters long.