Rockwell Automation T7419 ICS Regent+Plus Fire Detector Input Modules - Manual

ICS Regent+Plus
®
PD-7032
Industrial Control Services 1
Fire Detector Input Modules
(T7419)
Issue 1, March, 06
Fire detector input modules provide interfaces for 16 fire
detector inputs such as smoke detectors, flame detectors,
temperature detectors, and manual alarm call points. Each
module performs line monitoring on the field wiring
connections and automatic testing of the module’s input
electronics. Input and line status are reported back to the
controller for use in application program logic.
Features
· Sixteen input points.
· Individual channel Reset control output to reset latched fire
detectors.
· Fault tolerant operation when redundant modules and sensors
are configured.
· Hot-replaceable.
• Complete, automatic testing of all input circuits.
• Automatic line monitoring detects open and short field wiring
faults.
· Individual front panel indicators on each module show the
module’s fault/active and power status, as well as input status
indicators for each point.
· 2500 volt minimum electrical isolation between field and logic
circuits.
· TÜV certified, Risk Class 5.
The input module circuits are thoroughly tested, providing a
fail-safe interface for safety critical inputs. For fault tolerant
configurations, two fire detector input modules are used to